Blade 20.5 LED-Lisävalo Paketti

Blade – The LED bar that blends in and becomes part of the car.

With a height of only 25 mm, it is almost invisible in daylight – but when you switch on the high beam, you get a strong and wide beam pattern with a reach of 435 meters at 1 lux. Perfect for everything from daily commuting to weekend adventures. Ledson Blade is E-approved according to ECE R149 and is therefore allowed for road use.

Stylish by day – safe by night

Thanks to the specially designed brackets, the bar is easily mounted behind the license plate. When switched off, it blends seamlessly into the vehicle’s lines, making it perfect for those who want a powerful yet discreet lighting solution.

Hassle-free installation – everything included

For easy and smooth installation, a complete wiring harness is included for direct connection to the vehicle’s battery, suitable for LED, Xenon, and halogen vehicles. The cable and its connector are extra slim and can be routed neatly through a small opening into the engine bay. With a 170 cm long cable, you have plenty of reach during installation. You can easily adjust the beam pattern using the two screws on the outer edges of the bar once it is mounted. The bar can be mounted both above and below the license plate, as well as recessed or forward-mounted. It doesn’t get any easier than this!

High beam signal

For vehicles with halogen high beams, simply connect the yellow cable to the vehicle’s high beam wire. For vehicles with Xenon or LED, the XBB Kit (XBB Dongle & PowerUnit, item no. 121180, sold separately) is used for a smooth installation. Blade works with both 12V (passenger cars) and 24V (trucks), but only 12V when installed with XBB.

Features and technical data:

- Driving Beam pattern (wide and elongated) - Curved design to match the car's front - E-approved R149 (ref. no. 40), R10 (EMC-approved) - Range: 435 m (1 lux) - Lumens: 8,800 lumens (theoretical), 6,500 lumens (actual) - Color temperature: 5000K (Neutral white) - 88 W (22 x 4 W LED) - Voltage: 9–36V - IP69K (water-/dustproof) - Aluminum housing and polycarbonate lens - Side-reflecting optics - Pressure equalization membrane - Electronic thermal management

Included:

- Blade LED bar - Control unit with wiring harness - Mounting brackets - License plate locking strip - Hex screws with washers - Self-tapping screws - Installation manual Dimensions & weight (excluding brackets):- Width: 520 mm - Height: 25 mm - Depth: 25 mm - Weight: 850 g (including wiring and complete mounting kit)

Technical information

E-marking ECE R10, ECE R149 Height (mm) 25 mm Width (mm) 520 mm Depth 25 mm Warranty 36 months Beam pattern Driving beam Light source LED Number of diodes 22 x 4W Housing material Aluminium Lumens (theoretical) 8800 Polarity sensitive No Lumens (actual) 6500 Color temperature 5000K 1 lux at 435 m Inch size 20.5 inch Shape (round, oval, straight etc.) Curved IP rating IP69K Housing color Black Power consumption 12V 7.5A Power consumption 24V 3.6A Lens material Polycarbonate Manufacturer Ledson Electronic thermal management (ETM) Yes Bracket material Powder-coated, stainless steel Width (mm) 520 mm