VW Amarok 2023+ Roof Pods - Glide

Specifically developed for the VW Amarok, introducing Lazer’s custom-designed LED Light Pod for model year 2023 and onwards. The pod is engineered to house 2× Glide (Single E-mark) high-performance LED bars – a sleek installation delivering an impressive 23,000 raw lumens for an entirely new level of visibility and driving enjoyment at night. The lights included in this kit have been re-approved under UNECE Reg 149 (E-Ref 12.5) as “single lamps”, ensuring that the product remains street-legal in European markets where lamps must be mounted in pairs. Thanks to Lazer’s “flash-to-dim” function, a low reference number can also be achieved when required. Constructed from high-strength PC-ASA material, the pod comes with a 2K automotive-grade gloss black paint finish, blending seamlessly with the vehicle’s design for an installation that achieves a true OEM appearance. For those preferring a “no-drill” solution, the pod can be bonded to the roof and easily removed if necessary. The kit also includes a wire channel allowing the cable to be routed along the outside of the A-pillar, eliminating the need to drill through the vehicle’s roof. The pod is supplied with pre-mounted lights and a complete wiring harness for connection to the vehicle’s original electrical system. For vehicles equipped with LED Matrix headlights (depending on trim level), it is recommended to pair the kit with Lazer’s CANNY system, which ensures the lamps activate only when the road ahead is clear of oncoming traffic, and that the roof lights operate in sync with the vehicle’s Matrix high beam. As with all Lazer products, the Amarok Roof Pod, including the lights, is designed, engineered, and manufactured in the UK to the highest standards – and is covered by Lazer’s comprehensive 5-year warranty. 2× GLIDE (BOOST MODE) Voltage Range (DC): 10–32 V LED Life: 50,000 hours Weight: 0.68 kg (per lamp) HIGH BEAM FUNCTION Total Luminous Flux: 23,000 lm Total Driver ‘FOV’ Flux †: 13,916 lm Colour Temperature: 5,000 K Power Consumption: 240 W Peak Current Draw: 19.2 A Current Draw (at 14.4 V): 16.6 A Connector: 2-Pin Superseal (+25 cm Cable) CERTIFICATION IP Rating #: IP68 High Beam (E9 approval): ECE R149 (Double E-Mark) – Ref: 2× 12.5 – Low Output mode only (per lamp) EMC Certification: ECE R10 Salt Spray Test: ISO 9227 Dump Load Protection: ISO 7637-2 PHOTOMETRIC DATA Horizontal / Vertical Beam Angle: 64° / 13° 0.25 lx Line: 1,549 m 0.5 lx Line: 1,095 m 1 lx Line: 775 m 3 lx Line: 447 m Included Roof Pod (2x Glide pre-mounted) Positioning Templates (LH/RH) VHB Cleaning Sachet (x5) Black Dow Corning (1x Tube) One-Lamp Wiring Kit + Y-Splitter 12V Power Relay Cable Grommet (x1) Heat Shrink Butt Connector (x2) 1.2m Wire Concealer